LED Photo-therapy for Neonatal Jaundice

Excess bilirubin (hyperbilirubinemia) is the main cause of jaundice. Bilirubin, which is responsible for the yellow color of jaundice, is a normal part of the pigment released from the breakdown of “used” red blood cells.

New born infants are especially at high risk of developing hyperbilirubinemia. It is especially more acute in preborn babies. LED Phototherapy is the clinically proven & technically superior method of treating jaundice in infants. IREX 10 brings the high efficiency of well calibrated LED Phototherapy for treating jaundice in newborns. This specially designed budget mode, is designed to operate within the AAP parameters of treating severe cases of jaundice in neonates, optimally and economically.

Hence we are giving High Performance, premium LED Phototherapy, for treatment of newborn jaundice.

  • I REX 10

           Operating I Rex 10 is an ease, with its simple user friendly mechanisms. It is compact and can be used in a variety of places. Its ergonomic Y shaped wheel base slips easily under most warmers or bassinets.

Product Features:

  • Hi Bright Blue LED Technology
  • Spectral Irradiance > 35μ W/ cm2 nm brings superior intensity for faster curing
  • No Ultra violet – No Skin rashes
  • No Infrared – No Fluid loss/weight loss / Hyperthermia. This reduces the need for replenishing fluid loss in the newborn
  • Totalizer timer (non resettable) for measuring lifetime LED usage
  • Lower power consumption at 15W
  • Long life LED at 50,000 hours
  • At 50×30 cms, I REX 10 covers maximum base surface area of the newborn
  • I REX 10s smaller bezels ensure that the overall size of the PT head is not too large to obstruct caretakers from their duties
  • Lamp Head Tilt up to 90⁰ in either direction makes it easy to use alongside infant warmer
  • Clean, functional design. The well balanced Phototherapy stand is made of galvanized steel with epoxy powder coated finish, thus giving the machine an elegant look and yet is very easy to clean
  • Low Power consumption: 15 watts – Consumes more than 85% less power than conventional CFL Phototherapy units. Estimated electricity life savings up to Rs. 500,000*
  • Long Life of LED source > 50,000 Hours (with minimal lumen depreciation) vis a vis the standard 2500 hours for CFL Phototherapy units
  • Small footprint: Ergonomic Y shaped design helps not only in terms of balance and sturdiness; it is also useful for minimizing footprint as the PT can easily slide under most warmers and bassinets. This provides more space in NICUs
  • I REX 10 automatically cuts off at 85⁰C, thus offering higher safety during day to day operations.
  • I REX 20

One of the key features of I REX 20 is that it is fitted with 24 specially calibrated Blue LED lamps. The intensity of the lamps can be increased or decreased based on the patient need, using a manual knob.

In this compact, sleek design, lies a sophisticated and powerful Phototherapy unit capable of treating very serious cases of hyperbilirubinemia. I REX 20 offers greater power and greater flexibility in setting the light intensity.

  • I REX 30

I REX 30 uses specially designed Hi Bright blue LEDs, which emit light in 450-470 nm spectrum with peak absorption at 458 nm.

One of the key features of I REX 30 is that it is fitted with 24 specially calibrated Blue LED lamps. The intensity can be controlled through a microprocessor controlled electronic.

Attending caretakers’ needs are also taken care with the provision of three white LED lamps for observation. This helps reduce the strain on the eyes while attending to the patients.

  • I REX 40

        I REX 40 is a whole new way of treating jaundice in newborns. I REX 40 helps caretakers and physicians to regulate the light needed for treatment, using an inbuilt Light meter.

In this compact, sleek design, lies a sophisticated and powerful Phototherapy unit capable of treating very severe cases of hyperbilirubinemia. I REX 40 uses specially designed Hi Bright blue LEDs, which emit light in 450-470 nm spectrum with peak absorption at 458 nm.

Product Features

  • I REX 40 is the first phototherapy unit designed & manufactured in India to offer in built light meter. This helps the physician to set the desired intensity based on the actual light intensity readings
  • Hi Bright Blue LED Technology. With 24 Blue LEDs specifically calibrated to meet, AAP Norms**, I REX 40 is designed to provide a maximum surface coverage area of 50×30 cms. I REX 40 offer focused light instead of scattered light, thus enhancing the efficiency of the treatment. It also offers the patients extremities with more light at the 30-40 µW/cm2/nm than any other competing phototherapy unit. Most overhead conventional phototherapy units offer low intensity of 12 – 18 µW/cm2/nm
  • 3 White LED lamps for observation purposes.
  • Electronic user interface helps in regulating the desired intensity settings from 15 µW/cm2/nm to 70 µW/cm2/nm without adjusting machine height. This helps caretakers to adjust light settings for newborn patients, depending on the severity of the jaundice
  • I REX 40 is also equipped with a temperature sensor which is particularly useful if the baby is not thermally regulated
  • No Ultra violet – Potential risk of skin damage reduced.
  • No Infrared – No Fluid loss/weight loss / Hyperthermia. This reduces the need for replenishing fluid loss in the newborn.
  • Long life LED at 50,000 hours 000 Hours (with minimal lumen depreciation) vis a vis the standard 2500 hours for CFL Phototherapy units.
  • At 50×30 cms, I REX 40 covers maximum base surface area of the newborn.
  • I REX 40s smaller bezels ensure that the overall size of the PT head is not too large to obstruct caretakers from their duties.
  • Lamp Head Tilt up to 90⁰ in either direction makes it easy to use alongside infant warmer.
  • Clean, functional design. The well balanced Phototherapy stand is made of galvanized steel with epoxy powder coated finish, thus giving the machine an elegant look and yet is very easy to clean.
  • Small footprint: Ergonomic Y shaped design helps not only in terms of balance and sturdiness; it is also useful for minimizing footprint as the PT can easily slide under most warmers and bassinets. This provides more space in NICUs.
  • I REX 40 automatically cuts off at 85⁰C, thus offering higher safety during day to day operations.
  • Electronic LED display which provides patient timer, lifetime LED usage and intensity settings.
  • Lower power consumption at 15W.
Advertisements

Published by

ibismedicalequipments

IBIS Medical Equipment & Systems Pvt. Ltd. is an Indian organization established in the year 2008 and has since been engaged in manufacturing of high quality neonatology focused equipments. Our strategy at IBIS medical is to provide unique and innovative NICU products, developed through continues research. Furthermore, our well experienced bio medical engineers manufacture standard world class machines with their constantly upgraded skills. Over the years, IBIS Medical has installations spread across India, both in the private and government sectors. Ibis Medical has started catering to the export market, with installations now in countries in Africa and South Asia.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s